manualshive.com logo in svg

D-Link DSL-2641B - Wireless G Router, User Manual, Page: 23 / 84

Share
Download
D-Link DSL-2641B - Wireless G Router User Manual Download Page 23

Section 4 - Troubleshooting 

 

D-Link DSL-2641B User Manual 

 

   

 

 

 

 

 

 

 

 

 

            

23 

Using the Setup Wizard - For Dynamic IP Address connection

Please enter the appropriate information below as provided by your ISP. The 

Auto PVC Scan

 feature will not work in all cases so please enter the 

VPI/VCI

 

numbers if provided by the ISP. 
 
Click on the 

Next button 

to go to the next 

Setup Wizard

 window.

 

 

 

 

Using the Setup Wizard - For Static IP Address connection 

Please enter the appropriate information below as provided by your ISP. The 

Auto PVC Scan

 feature will not work in all cases so please enter the 

VPI/VCI

 

numbers if provided by the ISP. 

Please input the correct 

IP address

, 

Subnet Mask

, 

Default Gateway

 and 

DNS information

. Note: Should you select to leave default Gateway and 

DNS information blank, they should be automatically generated. 

Click on the 

Next button 

to go to the next 

Setup Wizard

 window. 

 

 

 

 

Summary of Contents for DSL-2641B - Wireless G Router





















































































Reviews:

No comments