manualshive.com logo in svg

D-Link DSL-2641B - Wireless G Router, User Manual, Page: 44 / 84

Share
Download
D-Link DSL-2641B - Wireless G Router User Manual Download Page 44

Section 4 - Troubleshooting 

 

D-Link DSL-2641B User Manual 

 

   

 

 

 

 

 

 

 

 

 

            

44 

OUTBOUND IP FILTER 

By default, all outgoing IP traffic from the LAN is allowed. The Outbound Filter allows you to create a filter rule to block outgoing IP traffic by 
specifying a filter name and at least one condition below. All of the specified conditions in this filter rule must be satisfied for the rule to take effect. 
 
To access the 

OUTBOUND IP FILTER 

setting window, click on the 

Outbound Filter 

button in the 

ADVANCED

 directory. 

ADD OUTBOUND IP FILTER 

Enter the 

Filter name

 and at least one of the following criteria: 

Protocol

, 

Source/Destination IP Address 

and

 Subnet Mask

, and 

Source/Destination Port

. 

 
Click on the

 Add/Apply

 button to add and apply settings.   

 
The 

Active Outbound IP Filter

 shows detailed information about each 

created outbound IP filter. To remove an IP filter, click on the 

Remove 

button (only appears when there is an existing IP filter). 

 

 

Summary of Contents for DSL-2641B - Wireless G Router





















































































Reviews:

No comments