65
show syslog host
Parameters
<index 1-4>
−
Specifies that the command will be applied to an index
of hosts. There are four available indexes, numbered 1 through 4.
Restrictions None.
Example usage:
To show Syslog host information:
DES-3550:4#show syslog host
Command: show syslog host
Syslog Global State: Disabled
Host Id Host IP Address Severity Facility UDP port Status
------- --------------- -------------- -------- -------- --------
1 10.1.1.2 All Local0 514 Disabled
2 10.40.2.3 All Local0 514 Disabled
3 10.21.13.1 All Local0 514 Disabled
Total Entries : 3
DES-3550:4#