105
config link_aggregation algorithm
ip_source_dest
−
Indicates that the switch should examine the IP source
address and the destination address.
Restrictions
Only administrator-level users can issue this command.
Example usage:
To configure link aggregation algorithm for mac-source-dest:
DES-3550:4#config link_aggregation algorithm mac_source_dest
Command: config link_aggregation algorithm mac_source_dest
Success.
DES-3550:4#
show link_aggregation
Purpose
Used to display the current link aggregation configuration on the
switch.
Syntax
show link_aggregation {group_id <value 1-6> | algorithm}
Description
This command will display the current link aggregation configuration
of the switch.
Parameters
<value>
−
Specifies the group id. The switch allows up to 6 link
aggregation groups to be configured. The group number identifies
each of the groups.
algorithm
−
Allows you to specify the display of link aggregation by
the algorithm in use by that group.
Restrictions None.
Example usage:
To display Link Aggregation configuration:
DES-3550:4#show link_aggregation
Command: show link_aggregation
Link Aggregation Algorithm = MAC-source-dest
Group ID : 1
Master Port : 1
Member Port : 5-10
Active Port:
Status : Disabled
Flooding Port : 5
