manualshive.com logo in svg

D-Link DS-3550, Command Line Interface Reference Manual

Share
Download
D-Link DS-3550 Command Line Interface Reference Manual Download Page 191

 

 

183

DES-3550:4#show authen server_group 
Command: show authen server_group 
 
Group Name    IP Address                                Protocol 
---------------       ---------------                                   -------- 
Darren              10.53.13.2                                  TACACS 
tacacs              10.53.13.94                                 TACACS 
           (This group has no entry) 
xtacacs            (This group has no entry) 
 
Total Entries : 4 
 
DES-3550:4# 

 

config authen parameter response_timeout 

Purpose 

Used to configure the amount of time the switch will wait for a user to 
enter authentication  before timing out.  

Syntax 

config authen parameter response_timeout <int 1-255> 

Description 

This command will set the time the switch will wait for a response of 
authentication from the user. 

Parameters 

response_timeout <int 1-255> - Set the time, in seconds, the switch 
will wait for a response of authentication from the user attempting to 
log in from the command line interface or telnet interface. 

Restrictions 

Only administrator-level users can issue this command. 

Example usage: 

To configure the response timeout for 60 seconds: 

DES-3550:4# config authen parameter response_timeout 60 
Command: config authen parameter response_timeout 60 
 
Success. 
 
DES-3550:4# 

 

config authen parameter attempt 

Purpose 

Used to configure the maximum number of times the switch will 
accept authentication attempts. 

Syntax 

config authen parameter attempt <int 1-255> 

Description 

This command will configure the maximum number of times the 
switch will accept authentication attempts. Users failing to be 

Summary of Contents for DS-3550



















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands