38
1. Turn on or reboot the
DPG-2000W
.
2. During the boot-up screen, wait for a
“Reset to factory default” timer
starts
message to appear.
Tap on the hardware reset button or power cycle to reboot the
DPG-2000W
before the timer ends (10 seconds), and the
DPG-2000W
will revert back to factory default settings.
4. During the next boot-up screen, a
Reset to Factory Default
message
should appear next to the Timer message, indicating a successful
hardware reset.
Reset to Factory Defaults
The hardware reset button is located at the back of the
DPG-2000W
. You can
use a bent paper clip to access the hardware reset button. The main function
of the hardware-reset button is to reboot the
DPG-2000W
. To reboot the
DPG-2000W
, only a light tap on the reset button is required.
Warning
Please note that resetting the
DPG-2000W
to its factory default settings
will erase all configurations and encryption information you may have set
through the web interface.
To reset the
DPG-2000W
back to the factory default settings, follow the
steps below:
Push Reset
