D-Link DP 300 - Print Server - Parallel, User Manual

Page: 42 / 152

37
Enable E-mail Notification
You can set the print server to send an alert message when the printer status
changes through e-mail. To enable this function, click Yes in Enable e-mail
notification . Then, input the administrator's e-mail address in the Destination
e-mail Address box.
E-mail Account Details
You can assign an e-mail address to the print server, so that your mail of the
account can be printed out directly through the printer (ASCII text only). To enable
this function, enter the e-mail account in the Print Server E-mail Address box.
Then, enter the server address, used to receive your e-mail in the Incoming
E-mail (POP3) Server Address box. For Outgoing E-mail (SMTP) Server
Address field, enter the server address that is used to send your e-mail.
If your mail server needs to verify the user when sending e-mail, Print Server will
apply the E-mail Account (POP3) Name and E-mail Account (POP3)
Password to the mail server.
E-mail Printing (To LPT1 Port)
This section is for you to do e-mail Printing configuration, including:
E-mail Printing (ASCII Text Only): Allows you to enable or disable the E-mail
printing.
Check E-mail Interval: Allow you to set up a time interval in minute in order to
check/receive E-mail periodically.
After done the configuration, click Apply Settings to restore the new
configuration, or Cancel to abandon.