D-Link DNS-120 - NAS Server - USB Product Manual Download Page 3

Page: 3 / 50

DNS-120 User’s Manual

D-Link Systems, Inc.

Package Contents

Note: Using a power supply with a different voltage than the one included with
the DNS-120 will cause damage and void the warranty for this product.

If any of the above items are missing, please contact your reseller.

Package Contents



D-Link DNS-120

Network Storage Adapter



CD-ROM with Manual and Software



Ethernet (CAT5 UTP/Straight-Through) Cable



5V 2.5A Power Supply

Minimum System Requirements



Computer with Windows

XP or 2000



Internet Explorer version 6.0 or Netscape Navigator version 7.0 and above



USB Hard Drive(s)



An available Ethernet port on the network

Summary of Contents for DNS-120 - NAS Server - USB



















































Search results

Summary of Contents for DNS-120 - NAS Server - USB

Reviews:

Related manuals for DNS-120 - NAS Server - USB

Brands by name

Popular brands

D-Link DNS-120 - NAS Server - USB, Product Manual

Search results

Summary of Contents for DNS-120 - NAS Server - USB

Reviews:

Related manuals for DNS-120 - NAS Server - USB

Brands by name

Popular brands