9
Hardware Installation
(Continued
)
Connect one end of the included VGA cable (15-pin HDDB Male / Male) to the
female connectors on the back of the PC. Connect the other end of the cable to
the rear panel of the
DKVM-16
. This step can be repeated for all PCs.
Using the included
DKVM-16
cable, locate the mouse connector (green) and
connect one end to the PS/2 mouse port on the back panel of the computer, and
the other end to the PC1 PS/2 mouse port on the back panel of the
DKVM-16
.
