10
Hardware Installation
(Continued
)
Using the included
DKVM-16
cable, locate the keyboard connector (purple) and
connect one end to the PS/2 keyboard port on the back panel of the computer,
and the other end to the PC1 PS/2 keyboard port on the back panel of the
DKVM-16
.
Back of PC
Double-check all of your connections. Make sure that the keyboard and mouse
cables are connected to the correct ports.
Repeat steps 5 through 8 for the remainder of the computers.
Attach the power supply to the
DKVM-16
unit and plug the other end into an
electrical receptacle. When you see the LED for Port 1 light up and hear a beep,
switch on your PCs and monitor.
Note: To maintain stable operation of the DKVM-16, please keep the unit powered
using the power adapter when in use, especially when the DKVM-16 is in a
daisy-chain stack.
