39
D-Link DIR-880L User Manual
Section 3 - Configuration
L2TP
Enter the
L2TP Server IP Address
provided by your ISP.
Enter the
Username
provided by your ISP.
Enter the
Password
provided by your ISP.
Select either
Always on
,
On demand
, or
Manual
.
Enter a maximum idle time during which the Internet connection
is maintained during inactivity. To disable this feature, enable
Auto-reconnect.
Select
Static IP
if your ISP assigned you the IP address, subnet
mask, gateway, and DNS server addresses. In most cases, select
Dynamic IP
.
Enter the
L2TP IP Address
provided by your ISP (for Static IP only).
Enter the
L2TP Subnet Mask
provided by your ISP (for Static IP
only).
Enter the
L2TP Gateway IP Address
provided by your ISP (for
Static IP only).
Enter the
Primary DNS Server
IP address assigned by your ISP.
Enter the
Secondary DNS Server IP
address assigned by your ISP.
L2TP Server IP
Address:
Username:
Password:
Reconnect Mode:
Maximum Idle
Time:
Address Mode:
L2TP IP Address:
L2TP Subnet
Mask:
L2TP Gateway IP
Address:
Primary DNS
Server:
Secondary DNS
Server:
Choose
L2TP
(Layer 2 Tunneling Protocol) if your Internet Service Provider (ISP) uses a L2TP connection. Your ISP can provide you with a username
and password.
