D-Link DIR-636L User Manual Download Page 92

Page: 92 / 161

D-Link DIR-636L User Manual

Section 3 - Configuration

To use the Universal Plug and Play (UPnP

™

) feature click on

Enabled

. UPnP provides compatibility with networking

equipment, software and peripherals.

Checking the box will allow the DIR-636L to respond

to pings. Unchecking the box may provide some extra

security from hackers.

Select from the drop-down menu if you would like to apply

the Inbound Filter to the WAN ping. Refer to the Inbound

Filters section for more information.

You may set the port speed of the Internet port to 10Mbps,

100Mbps, 1000Mbps, or Auto (recommended).

Check the box to allow multicast traffic to pass through

the router from the Internet (IPv4).

Check the box to allow multicast traffic to pass through

the router from the Internet (IPv6).

Enable UPnP:

WAN Ping:

WAN Ping Inbound

Filter:

WAN Port Speed:

Enable IPV4

Multicast Streams:

Enable IPV6

Multicast Streams:

Advanced Network Settings

Summary of Contents for DIR-636L


































































































































































Search results

Summary of Contents for DIR-636L

Reviews:

Related manuals for DIR-636L

Brands by name

Popular brands

D-Link DIR-636L, User Manual

Search results

Summary of Contents for DIR-636L

Reviews:

Related manuals for DIR-636L

Brands by name

Popular brands