DIR-615A
Wireless N300 Router
User Manual
Configuring via Web-based Interface
Configuring Wireless Network
This configuration step is available for the
Router
,
Access point
,
WISP Repeater
, and
Repeater
modes.
1.
On the
Wireless Network
page, in the
Network name
field, specify your own name for
the wireless network or leave the value suggested by the router.
2.
In the
Password
field, specify your own password for access to the wireless network or
leave the value suggested by the router (WPS PIN of the device, see the barcode label).
3.
You can restore the parameters of the wireless network specified before resetting to factory
defaults. To do this, click the
RESTORE
button.
Figure 37. The page for configuring the wireless network.
4.
If you want to create an additional wireless network isolated from your LAN, select the
Enable guest network
checkbox (available for the
Router
and
WISP Repeater
modes
only).
5.
In the
Network name
field, specify your own name for the guest wireless network or leave
the value suggested by the router.
6.
If you want to create a password for access to the guest wireless network, deselect the
Open
network
checkbox and fill in the
Password
field.
Page
49
of 174
