D-Link DIR-615A User Manual Download Page 169

Page: 169 / 174

DIR-615A

Wireless N300 Router

User Manual

Configuring via Web-based Interface

Devices and Rules

On the

Yandex.DNS / Devices and Rules

page, you can specify a filtering mode for each

device separately.

Figure 128. The

Yandex.DNS / Devices and Rules

page.

In the

Known IP/MAC Addresses

section, the devices connected to the local network of the

router at the moment and their relevant filtering mode are displayed.

To create

a new filtering rule for a device, click the

Add

button in the

Rules

section, or left-click

the name of the filtering mode in the line of the device for which a rule should be created in the

Known IP/MAC Addresses

section.

Figure 129. Adding a new rule for the Yandex.DNS service.

5 When a new rule for filtering is created, a MAC address and IP address pair is displayed on the

Connections

Setup / LAN

page. The created pair will be deleted with the relevant rule.

Page

169

of 174

Summary of Contents for DIR-615A















































































































































































Search results

Summary of Contents for DIR-615A

Reviews:

D-Link DIR-615A, User Manual, Page: 169 / 174

Search results

Summary of Contents for DIR-615A

Reviews: