DIR-615A
Wireless N300 Router
User Manual
Configuring via Web-based Interface
Roaming
On the
Wi-Fi / Roaming
page, you can enable the function of smart adjustment of Wi-Fi clients.
This function is designed for wireless networks based on several access points or routers. If the
function is enabled for all access points (routers) which establish a wireless network, then wireless
clients will always connect to the device with the highest signal level.
Figure 92. The
Wi-Fi / Roaming
page.
To enable the function, move the
Enable
switch to the right. Upon that the following settings are
available on the page.
Parameter
Description
Port number
The number of the port used for data exchange between access
points (routers).
Use multicast for
service data exchange
Move the switch to the right in order to use multicast traffic for
service data exchange between access points (routers). This setting is
needed if the devices which support the smart adjustment function
are located in different subnets. If the switch is moved to the right,
the
Multicast Settings
section is displayed on the page.
If the switch is moved to the left, broadcast traffic is used for service
data exchange.
Maximum time of
storing data on
adjacent clients
The maximum time period (in seconds) during which the access
point (router) stores data on the signal strength of the client located
on its coverage area.
Page
119
of 174
