64
D-Link DIR-615+ User Manual
Section 4 - Configuration
Start IP:
If
DHCP server
has been selected, specify the starting IP address in
the DHCP server pool.
End IP:
If
DHCP server
has been selected, specify the end IP address in the
DHCP server pool.
Lease Time:
If
DHCP server
has been selected, specify the lease time in minutes
for DHCP-issued IP addresses.
Enable DNS
Relay:
Disable to transfer the DNS server information from your ISP to your
computers. If enabled, your computers will use the router for a DNS
server.
External DHCP
server IP:
If
DHCP relay
has been selected, specify the external DHCP server
from which IP addresses should be assigned. Click on the
Add
button
to add more server IPs.
Static IP Addresses
Known Clients:
Click this button to select a current host to add to the table of reserved
static IP address. See
Clients List
below.
Add:
Click this button to manually reserve a local IP address.
Delete:
Click this button to delete a selected reserved IP address.
IP address:
Indicates the reserved static IP.
MAC address:
Indicates the MAC address for which the IP is reserved.
Hostname:
Indicates the hostname of the client for which the IP is reserved.
Click
Apply
when you are done.
IPv4 (cont)
