60
D-Link DIR-615+ User Manual
Section 4 - Configuration
From this page you can configure your wireless network settings.
Wireless network
General Settings
Enable Wireless:
Toggle this switch to enable wireless access.
Wireless mode:
Select a wireless mode from the list.
Select channel
automatically:
Toggle this switch to enable to allow the router to automatically select
an operating channel.
Enable additional
channels:
Toggle this switch to enable higher channels on the 5 GHz band.
Note: This feature is only supported over 5 GHz.
Channel:
If
Select channel automatically
is disabled, select the channel your
router will use. If
Select channel automatically
is enabled, push the
Refresh
button to start auto channel selection algorith.
Enable periodic
scanning:
Toggle this switch to periodically scan for an optimal channel.
Scanning period:
If
Enable periodic scanning
is enabled, specify the amount of time
in seconds between scans.
Wi-Fi Network
Network name
(SSID):
Specify the desire SSID for your wireless network. All devices must
connect to this SSID.
Hide SSID:
Toggle this switch to prevent SSID broadcasting. Clients will still need
to enter the correct SSID to connect to your network.
