manualshive.com logo in svg

D-Link DIR-605, Manual

Share
Download
D-Link DIR-605 Manual Download Page 80

76

D-Link DIR-605 User Manual

Section 4 - Security

Configure WPA-Personal (PSK)

It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish 

XJSFMFTT DPOOFDUJWJUZ CFGPSF FOBCMJOH FODSZQUJPO:PVS XJSFMFTT TJHOBM NBZ EFHSBEF XIFO FOBCMJOH FODSZQUJPO EVF UP

the added overhead.

1. Log into the web-based configuration by opening a web browser 

and entering the IP address of the router (192.168.0.1). Click on
Setup and then click Wireless Settings on the left side.

2. Next to Security Mode, select WPA-Personal.

3. Next to WPA Mode, select Auto, WPA2 Only, or WPA Only. Use 

Auto if you have wireless clients using both WPA and WPA2.

4. Next to Cypher Type, select TKIP and AES, TKIP, or AES. If you have 

wireless clients that use both types, use TKIP and AES.

5. Next to Group Key Update Interval, enter the amount of time before the group key used for broadcast and multicast data is 

changed (3600 is default).

6. Next to Pre-Shared Key, enter a key (passphrase). The key is entered as a pass-phrase in ASCII format at both ends of the 

wireless connection. The pass-phrase must be between 8-63 characters. 

7. Click Save Settings to save your settings. If you are configuring the router with a wireless adapter, you will lose connectivity 

until you enable WPA-PSK on your adapter and enter the same passphrase as you did on the router.

Summary of Contents for DIR-605







































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands