manualshive.com logo in svg

D-Link DIR-605, Manual

Share
Download
D-Link DIR-605 Manual Download Page 34

30

D-Link DIR-605 User Manual

Section 3 - Configuration

Enter the IP address assigned by your ISP.

Enter the Subnet Mask assigned by your ISP.

Enter the Gateway assigned by your ISP.

The DNS server information will be supplied by your ISP (Internet Service Provider.)

Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1500 is the default 
MTU.

The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended 

UIBUZPVDIBOHFUIFEFGBVMU."$BEESFTTVOMFTTSFRVJSFECZZPVS*41:PVDBOVTFUIF$MPOF:PVS1$T."$"EESFTT

 button to replace 

the Internet port’s MAC address with the MAC address of your Ethernet card.

IP Address:

Subnet Mask:

Default Gateway:

DNS Servers:

MTU:

MAC Address

Static IP Address

4FMFDU 4UBUJD *1 "EESFTT JG BMM UIF *OUFSOFU QPSUT *1 JOGPSNBUJPO JT QSPWJEFE UP ZPV CZ ZPVS *41:PV XJMM OFFE UP FOUFS JO UIF *1 BEESFTT

subnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the fields must be in the 
appropriate IP form, which are four octets separated by a dot (x.x.x.x). The Router will not accept the IP address if it is not in this format.

Summary of Contents for DIR-605







































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands