D-Link DIR-605, Manual

Page: 52 / 102

48 D-Link DIR-605 User Manual
Section 3 - Configuration
Enter a name for the inbound filter rule.
Select Allow or Deny.
Check to enable rule.
Enter the starting IP address. Enter 0.0.0.0 if
you do not want to specify an IP range.
E n t e r t h e e n d i n g I P a d d r e s s . E n t e r
255.255.255.255 if you do not want to specify
and IP range.
Click the Save button to apply your settings.
:PV NVTU DMJDL 4BWF 4FUUJOHT BU UIF UPQ UP
save the settings.
This section will list any rules that are created.
:PV NBZ DMJDL UIF Edit icon to change the
settings or enable/disable the rule, or click the
Delete icon to remove the rule.
Name:
Action:
Enable:
Source IP Start:
Source IP End:
Save:
Inbound Filter
Rules List:
The Inbound Filter option is an advanced method of controlling data received from the Internet. With this feature you
can configure inbound data filtering rules that control data based on an IP address range. Inbound Filters can be used
with Virtual Server, Port Forwarding, or Remote Administration features.
Inbound Filters