61
D-Link DIR-604 User Manual
Section 3 - Configuration
Set the transmit power of the antennas.
Beacons are packets sent by an Access Point to
synchronize a wireless network. Specify a value.
100 is the default setting and is recommended.
This value should remain at its default setting of
2432. If inconsistent data flow is a problem, only
a minor modification should be made.
The fragmentation threshold, which is specified
in bytes, determines whether packets will be
fragmented. Packets exceeding the 2346 byte
setting will be fragmented before transmission.
2346 is the default setting.
(Delivery Traffic Indication Message) 1 is the
default setting. A DTIM is a countdown informing
clients of the next window for listening to
broadcast and multicast messages.
Select
Short
or
Long Preamble
. The preamble defines the length of the CRC block (Cyclic Redundancy Check is a common
technique for detecting data transmission errors) for communication between the wireless router and the roaming wireless
network adapters. Note: High network traffic areas should use the
Short Preamble
type.
Select
None
to disable this feature. Select
Always
to force the Router to require each wireless device on the network to
perform an RTS/CTS handshake before they are allowed to transmit data. Select
Auto
to allow the Router to decide when
RTS/CTS handshakes are necessary
Use the drop-down menu to select the wireless modes you want to enable on the Router. The available options are
802.11n
only
,
802.11 Mixed (g/b)
, and
802.11 Mixed (n/g/b)
.
Use the drop-down menu to select
20MHz
or
20/40MHz (Auto)
.
Transmit
Power:
Beacon
Period:
RTS
Threshold:
Fragmentation:
DTIM
Interval:
Preamble
Type:
CTS Mode:
Wireless
Mode:
Bandwidth:
Advanced Wireless Settings
