D-Link DIR-604 User Manual Download Page 28

Page: 28 / 110

D-Link DIR-604 User Manual

Section 3 - Configuration

Firmware Update

Displays the current firmware version.

Displays the current firmware date.

Click the

Check Now

button, or the “Click here

to check for an upgrade on our support site.”

hyperlink at the top of the page, to see what the

latest firmware for the Router is.

After you have downloaded the new firmware,

click the

Browse

control to locate the firmware

update on your hard drive. Click

Upload

complete the firmware upgrade.

This function allows the user to transfer the

language of the GUI from English to their own

language by upgrading the language pack.

Click the

Browse

control to locate the desired

language pack on your hard drive. Click

Upload

to complete the language pack upgrade.

Current

Firmware

Version:

Current

Firmware

Date:

Check Online

Now for Latest

Firmware

Version:

Firmware

Upgrade:

Language

Pack

Upgrade:

You can upgrade the firmware of the Router here. Please check the D-Link support site for firmware updates at http://

support.dlink.com or simply click the

Check Now

button located in the Firmware Information section. You can download

firmware upgrades to your hard drive from the D-Link support site. Make sure the firmware you want to use is on the

local hard drive of the computer. Click on

Browse

to locate the firmware file to be used for the update.

Summary of Contents for DIR-604















































































































Search results

Summary of Contents for DIR-604

Reviews:

Related manuals for DIR-604

Brands by name

Popular brands

D-Link DIR-604, User Manual

Search results

Summary of Contents for DIR-604

Reviews:

Related manuals for DIR-604

Brands by name

Popular brands