80
D-Link DIR-601 User Manual
Section 4 - Security
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish wireless connectivity before
enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead.
1.
Log into the web-based configuration by opening a web browser and entering
the IP address of the router (192.168.0.1). Click on
Setup
and then click
Wireless
Settings
on the left side.
2. Select the Manual Wireless Connection Setup button.
3. Next to
Security Mode
, select
WPA-Enterprise
.
4. Next to
WPA Mode
, select
Auto
,
WPA2 Only
, or
WPA Only
. Use
Auto
if you have
wireless clients using both WPA and WPA2.
5. Next to
Cypher Type
, select
TKIP and AES
,
TKIP
, or
AES
. If you have wireless
clients that use both types, use
TKIP and AES
.
6. Next to
Group Key Update Interval
, enter the amount of time before the group
key used for broadcast and multicast data is changed (3600 is default).
7. Next to
Authentication Timeout
, enter the amount of time before a client is
required to re-authenticate (60 minutes is default).
8. Next to
RADIUS Server IP Address
enter the IP Address of your RADIUS server.
9. Next to
RADIUS Server Port
, enter the port you are using with your RADIUS server.
1812 is the default port.
10. Next to
RADIUS Server Shared Secret
, enter the security key
Configure WPA-Enterprise (RADIUS)