36
D-Link DIR-601 User Manual
Section 3 - Configuration
Manual Wireless Network Setup
Check the box to enable the wireless function. If you do
not want to use wireless, uncheck the box to disable all
the wireless functions. Click
Add New
to create your own
time schedule to enable the wireless function.
Service Set Identifier (SSID) is the name of your wireless
network. Create a name using up to 32 characters. The
SSID is case-sensitive.
Select one of the following:
802.11g Only
- Select if all of your wireless clients are
802.11g.
802.11n Only
- Select only if all of your wireless clients
are 802.11n.
Mixed 802.11n and 802.11g
- Select if you are using
a mix of 802.11n and 802.11g wireless clients.
The
Auto Channel Scan
setting can be selected to allow
the DIR-601 to choose the channel with the least amount
of interference.
Indicates the channel setting for the DIR-601. By default
the channel is set to 6. The Channel can be changed to
fit the channel setting for an existing wireless network
or to customize the wireless network. If you enable
Auto
Channel Scan
, this option will be greyed out.
Select the Channel Width:
Auto 20/40
- Select if you are using both
802.11n and non-802.11n wireless devices.
20MHz
- Select if you are not using any 802.11n wireless
clients. This is the default setting.
40MHz
- Select if you are using only 802.11n wireless
clients.
Enable
Wireless:
Wireless
Network
Name:
802.11 Mode:
Enable Auto
Channel Scan:
Wireless
Channel:
Channel
Width:
