56
D-Link DIR-601 User Manual
Section 3 - Configuration
Enter a new password for the Administrator Login Name. The
administrator can make changes to the settings.
Enter the new password for the User login. If you login as the
User, you can only see the settings, but cannot change them.
Enter a name for the DIR-601 router.
Enables a challenge-response test to require users to type
letters or numbers from a distorted image displayed on the
screen to prevent online hackers and unauthorized users from
gaining access to your router’s network settings.
Remote management allows the DIR-601 to be configured from
the Internet by a web browser. A username and password is still
required to access the Web-Management interface. In general,
only a member of your network can browse the built-in web
pages to perform Administrator tasks. This feature enables
you to perform Administrator tasks from the remote (Internet)
host.
The port number used to access the DIR-601.
Example: http://x.x.x.x:8080 whereas x.x.x.x is the Internet IP
address of the DIR-601 and 8080 is the port used for the Web
Management interface.
This section will list any rules that are created. You may click the
Edit
icon to change the settings or enable/disable the rule, or
click the
Delete
icon to remove the rule.
Admin Password:
User Password:
Gateway Name:
Enable Graphical
Authentication:
Remote
Management:
Remote Admin
Port:
Remote Admin
Inbound Filter:
Administrator Settings
This page will allow you to change the Administrator and User passwords. You can also enable Remote Management. There are two accounts that
can access the management interface through the web browser. The accounts are admin and user. Admin has read/write access while user has
read-only access. User can only view the settings but cannot make any changes. Only the admin account has the ability to change both admin and
user account passwords.
