DIR-320
Wireless N150 Router with 3G/CDMA/LTE Support
and USB Port
User Manual
Configuring via Web-based Interface
Parameter
Description
DNS Relay
Select the checkbox so that the devices connected to the router
obtain the address of the router as the DNS server address.
Deselect the checkbox so that the devices connected to the router
obtain the address transmitted by the ISP as the DNS server address.
Start IP
The start IP address of the address pool used by the DHCP server to
distribute IP addresses to clients.
End IP
The end IP address of the address pool used by the DHCP server to
distribute IP addresses to clients.
Lease time
The lifetime of IP addresses leased by the DHCP server. At the end
of this period the leased IP address is revoked and can be distributed
to another device, unless the previous device has confirmed the need
to keep the address.
External DHCP server IP
The IP address of the external DHCP server which assigns IP
addresses to the router's clients.
When all needed settings are configured, click the
Apply
button.
In the
IPv6 DHCP server
section, you can enable the DHCPv6 server of the router and select its
operating mode.
Figure 108. The section for configuring the DHCPv6 server.
Parameter
Description
Enable DHCPv6 Server
Select the checkbox to enable the DHCPv6 server of the router.
When the checkbox is selected, the
State mode
drop-down list and
the
Leased Time
field are displayed on the page.
DHCP PD
Select the checkbox to activate the Prefix Delegation function. When
the checkbox is selected, the router requests a prefix to configure
IPv6 addresses for clients of the LAN from a delegating router.
Page
127
of 220
