D-Link DIR-301 User Manual Download

Page: 21 / 67

D-Link DIR-301 User Manual

Section 3 - Configuration

Select

Dynamic

(most common) or

Static

. Select

Static

if your ISP assigned you the IP address, subnet

mask, gateway, and DNS server addresses.

Enter the IP address (Static PPTP only).

Enter the Primary and Secondary DNS Server

Addresses (Static PPTP only).

Enter the Gateway IP Address provided by your ISP.

The DNS server information will be supplied by your

ISP (Internet Service Provider.)

Enter the Server IP provided by your ISP (optional).

Enter your PPTP account name.

Enter your PPTP password and then retype the

password in the next box.

Enter a maximum idle time during which the Internet

connection is maintained during inactivity. To disable

this feature, enable Auto-reconnect.

Maximum Transmission Unit - you may need to change

the MTU for optimal performance with your specific ISP. 1492 is the default MTU.

Select either Always-on, Manual, or Connect-on demand.

PPTP:

IP Address:

Subnet Mask:

Gateway:

DNS:

Internet Setup

PPTP

Choose PPTP (Point-to-Point-Tunneling Protocol ) if your ISP uses a PPTP connection. Your ISP will provide you with

a username and password. This option is typically used for DSL services.

Server IP:

PPTP Account:

PPTP Password:

Maximum Idle

Time:

MTU:

Connect Mode:

Summary of Contents for DIR-301




































































Search results

Summary of Contents for DIR-301

Reviews:

Related manuals for DIR-301

Brands by name

Popular brands

D-Link DIR-301, User Manual

Search results

Summary of Contents for DIR-301

Reviews:

Related manuals for DIR-301

Brands by name

Popular brands