85
D-Link DIR-1750 User Manual
Section 3 - Configuration
System Admin - System
In the Management menu on the bar at the top of the page, click
System Admin
to access the Admin page, then click
System
. This page allows you to save the router’s current configuration, load a previously saved configuration, reset the
router to its factory default settings, or reboot the router.
To configure the Admin settings, click the
Admin
link. Refer to
Click
Save
at any time to save the changes you have made on this page.
System
Save Settings to Local
Hard Drive
This option will save the current router configuration settings
to a file on your computer.
Load Settings from
Local Hard Drive
This option will load a previously saved router configuration
file. This will overwrite the router’s current configuration.
Restore to Factory
Default Settings
This option will restore the router back to the default
configurations stored in the firmware. Any settings that have
not been saved will be lost, including any rules that you have
created. If you want to save the current router configuration
settings, use the
Save Settings To Local Hard Drive
button
above.
Auto Reboot Configuration
Reboot the Device
Click to reboot the router immediately.
Auto Reboot
You may set the router to automatically reboot at a set time.
The options are
Never, Daily,
or
Weekly
. You may set the
hour, the minute, and the day you wish to have the router
automatically reboot at.
