D-Link DIR-1750 User Manual Download

Page: 13 / 151

D-Link DIR-1750 User Manual

Section 2 - Installation

D-Link Wi-Fi App Setup

The D-Link Wi-Fi app allows you to install and configure your DIR-1750 from your compatible Android or iOS device.

Note:

The screenshots may be different depending on your mobile device’s OS version. The following steps show the iOS interface

of the D-Link Wi-Fi app. If you are using an Android device, the appearance may be different from that of the screenshots, but the

process is the same.

Step 3

Tap on the

Install New Device

button at the middle of the screen.

Step 1

Search and install the free

D-Link Wi-Fi

app available on the App Store or on

Google Play. You can also scan the QR code on the right, which will take you

to the respective D-Link Wi-Fi app store page.

Step 2

Launch the D-Link Wi-Fi app from the home screen of your device.

D-Link Wi-Fi

Summary of Contents for DIR-1750
























































































































































Search results

Summary of Contents for DIR-1750

Reviews:

Related manuals for DIR-1750

Brands by name

Popular brands

D-Link DIR-1750, User Manual

Search results

Summary of Contents for DIR-1750

Reviews:

Related manuals for DIR-1750

Brands by name

Popular brands