Dial-In Configuration
71
From the main menu, enter 13 to go to menu 13, Default Dial-in
Setup. This section will describe how to configure the protocol-
independent fields in this menu. For the protocol-dependent fields,
refer to the appropriate chapters.
1.
Telco Options: CLID Authen.—This field sets the CLID
authentication parameter for all incoming calls. There are three
options for this field:
◊
None—No CLID is required.
◊
Required—Must provide CLID, or call is disconnected.
◊
Preferred—If the CLID is available then CLID will be used
to do authentication. If the CLID is not available the call will
continue.
2.
PPP Options: Recv. Authen.—This field sets the
authentication protocol used for incoming calls. User names and
passwords are configured in the next section (Remote
users/Dial-in Users Setup). Options for this field are:
