66
Remote Node Configuration
3.
Multiple Link Options: BOD Calculation—Select the
direction of the traffic you wish to calculate in order to
determine when to add or subtract a link. The default for this
field is Transmit or Receive.
4.
Multiple Link Options: Base Trans Rate—Select the base
data transfer rate for this Remote Node. This parameter is in
kbps (kilobits per second). There are two options for this field:
◊
64—Only one channel will be used.
◊
128—Two channels will be used when a packet triggers a
call.
5.
Multiple Link Options: Max Trans Rate—Enter the
maximum data transfer rate allowed for this Remote Node. This
parameter is in kilobits per second. There are two options for
this field:
◊
64—At most one channel can be used.
◊
128—A maximum of two channels can be used.
6.
Multiple Link Options: Target Utility—Enter the two
thresholds, separated by a hyphen [-], for subtracting and adding
the second channel. The default is 32-48.
7.
Multiple Link Options: Add Persist—This parameter specifies
the number of seconds where traffic is above the adding
threshold before the router will bring up the second channel. The
default is 5 seconds.
8.
Multiple Link Options: Subtract Persist—This parameter
specifies the number of seconds where traffic is below the
subtraction threshold before the router drops the second
channel. The default is 5 seconds.
