D-Link Co.,_______________________________________________________________________ FAQ
FAQ: 11
-
Set Active to ‘Yes’.
-
Set Network # to ‘00000222’ (The internal network
number of the server).
-
Set Gateway Node to the number of the remote node (1-
4) for this setup.
The remote ISDN router (Cisco, Ascend...etc.) will have to
complete similar configuration changes in order to talk to
the Router.
5.e
Bridging IPX
1.
Router on the NetWare server side
My-net Rem-net
| |
O--| |--O
|---[Router]-----------[ISDN Router]---|
O--| |--O
^ | | ^
| |
NetWare NetWare
Server Client
The Router can accept calls from a remote router to Bridge
IPX packets. In this configuration, the stations on the
remote network (Rem-net) will have access to the IPX
network resources available on ‘My-net’.
In Menu 1:
-
Set Bridge to ‘Yes’.
In Menu 3.4:
-
Set Handle IPX to ‘Server’.
In Menu 11.1:
-
Set Call Direction to ‘Incoming’.
-
Set Bridge to ‘Yes’.
-
Select ‘Yes’ to editing the Bridge options.
In Menu 11.3:
-
Set Dial-On-Broadcast to ‘No’.
The remote ISDN router (Cisco, Ascend...etc.) will have to
complete similar configuration changes in order to talk to
the Router.
2.
Router on the NetWare client side
My-net Rem-net
| |
O--| |--O
|---[Router]-----------[ISDN Router]---|
O--| |--O
^ | | ^
| |
