9
D-Link DHP-W307AV User Manual
Section 1 - Product Overview
Hardware Overview
Side
3
1
Reset Button
Press and hold the button for 2 seconds to reset to factory default.
2
WPS/Simple Connect LED
When enabling WPS, the light will blink during broadcast. Once connected, the LED will remain lit
5 seconds and then will turn off. The LED will start blinking after the Encryption button is pushed.
The LED will turn off once the PowerLine AV is connected to a PowerLine network.
3
WPS Button
Press to start the WPS process. You will have 120 seconds to start the WPS process on another
wireless device.
One Touch AP Configuration
1. Press the
WPS button
on your wireless router or access point. The WPS LED will flash on and off.
2. Press the
WPS button
on the DHP-W307AV and hold it for 5 seconds.
4
Simple Connect Button
Push this button to establish a secure Powerline network with other PowerLine AV devices.
2
1
4
Summary of Contents for DHP-W307AV
Page 1: ......
