53
D-Link DHP-W307AV User Manual
Section 3 - Configuration
Configure WPA/WPA2 Personal
It is recommended to enable encryption on your wireless access point before your wireless network adapters. Please establish wireless connectivity
before enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead.
1. Log into the web-based configuration by opening a web browser and entering the IP address of the access point (192.168.0.50). Click on Setup
and then click
Wireless.Settings
on the left side.
2. For
Security Mode,
select
WPA.Personal
.
3. For
WPA Mode,
you can select
Auto.(WPA.or.WPA2)
,
WPA2.only.
or
WPA.Only
.
4. For
Cipher Type
, select
TKIP.and.AES
or
TKIP
or AES
.
5. For
Pre-Shared Key
, enter a key. The
Pre-Shared Key
must be
between 8-63 characters.
6. Click
Save Settings
at the top of the window to save your settings.
If you are configuring the access point with a wireless adapter, you
will lose connectivity until you enable WPA-PSK on your adapter
and enter the same passphrase as you did on the access point.
Summary of Contents for DHP-W307AV
Page 1: ......
