14
D-Link DHP-W307AV User Manual
Section 2 - Installation
The Simple Connect Button is used to add a PowerLine AV device to a PowerLine network. You can allow the DHP-W307AV to join a network by
pressing the Simple Connect Button to toggle it to the Broadcast state or Join state.
The Simple Connect Button has 3 different trigger states:
Broadcast state
- Enables the DHP-W307AV to provide information for another PowerLine AV device to join its PowerLine
network (works even if it is the only device existing within the network group). The first PowerLine device will use this state
when the Simple Connect Button is pressed.
Join State
- This allows an ungrouped PowerLine AV device to join an existing PowerLine network.
PowerLine devices added after the first device will be in the Join State when the Simple Connect Button is pressed.
Ungroup State
- Hold down the
Simple Connect Button
for more than 10 seconds to detach the device from its network group.
PowerLine Network
Button Usage
Summary of Contents for DHP-W307AV
Page 1: ......
