28
D-Link DHP-W221AV User Manual
Section 3 - Configuration
System
Save To Local
Drive:
Load From
Local Hard Drive:
Restore to
Factory Default:
Reboot the
Device:
Use this option to save the current DHP-W220AV configuration
settings to a file on the computer you are using. Click the
Save
button. You will then see a file dialog where you can select a
location and file name for the settings.
Use this option to load previously saved DHP-W220AV
configuration settings. Click
Browse
to find a previously saved
configuration file. Then, click the
Upload Settings
button to
transfer those settings to the DHP-W220AV.
This option will restore all configuration settings back to the
settings that were in effect at the time the DHP-W220AV was
shipped from the factory. Any settings that have not been
saved will be lost, including any rules that you have created. If
you would like to save the current DHP-W220AV configuration
settings, use the
Save
button above.
Click to reboot the DHP-W220AV.
This page lets you both save and delete settings on your DHP-W220AV.
