DGS-3224TGR Gigabit Ethernet Switch User’s Guide
45
Figure 6- 19. SNMP Group Table – Add window
The following parameters are used in the SNMP Group Table windows:
Parameter
Description
Group Name
Type an alphanumeric string of up to 32 characters. This is used to identify the new
SNMP group of SNMP users.
Read View Name
This name is used to specify the SNMP group created can request SNMP messages.
Write View Name
Specify a SNMP group name for users that are allowed SNMP write privileges to the
switch’s SNMP agent.
Notify View Name
Specify a SNMP group name for users that can receive SNMP trap messages
generated by the switch’s SNMP agent.
Security Model
Use the pull-down menu to select the SNMP version. Select one of the following:
SNMPv1
– Specifies that SNMP version 1 will be used.
SNMPv2
– Specifies that SNMP version 2c will be used. The SNMP v2c supports both
centralized and distributed network management strategies. It includes improvements
in the Structure of Management Information (SMI) and adds some security features.
SNMPv3
– Specifies that the SNMP version 3 will be used. SNMP v3 provides secure
access to devices through a combination of authentication and encrypting packets over
the network.
Security Level
Use the pull-down menu to select the SNMP version:
NoAuthNoPriv
−
Specifies that there will be no authorization and no encryption of
packets sent between the switch and a remote SNMP manager.
AuthNoPriv
−
Specifies that authorization will be required, but there will be no
encryption of packets sent between the switch and a remote SNMP manager.
AuthPriv
−
Specifies that authorization will be required, and that packets sent between
the switch and a remote SNMP manger will be encrypted.
