4 Configuration
D-Link Web Smart Switch User Manual
4
4
5
5
Figure 4.56 – L2 Functions > Multicast > Multicast Forwarding
State:
Specify the state of MLD Snooping VLAN to be enabled or disabled.
Querier State:
Specify the querier state to be enabled or disabled.
Fast Leave:
Specify the fast leave feature to be enabled or disabled.
Click
Apply
to implement changes made.
Static Router Ports:
Selects the ports to be static router ports and assigned for MLD snooping for the VLAN.
Dynamic Router Ports:
Select the ports to be dynamic router ports and assigned for MLD snooping for the
VLAN.
Click
Apply
for changes to take effect.
L2 Functions > Multicast > Multicast Forwarding
The Multicast Forwarding page
displays all of the entries made into the Switch’s static multicast forwarding
table. To implement the Multicast Forwarding Settings, input
VID
,
Multicast MAC Address
and port settings,
then click
Add
.
Figure 4.57 – L2 Functions > Multicast > Multicast Forwarding
VID:
The VLAN ID of the VLAN to which the corresponding MAC address belongs.
Multicast MAC Address:
The MAC address of the static source of multicast packets. This must be a
multicast MAC address.
Port Settings:
Allows the selection of ports that will be members of the static multicast group and ports
either that are forbidden from joining dynamically, or that can join the multicast group dynamically, using
GMRP.
Member -
The port is a static member of the multicast group.
None -
No restrictions on the port dynamically joining the multicast group. When
None
is chosen,
the port will not be a member of the Static Multicast Group.
