4 Configuration
D-Link Web Smart Switch User Manual
Select packet type based on MAC address, IPv4 address, IPv6 address or packet content. This will change
the window according to the requirements for the type of profile.
MAC:
Defines the ACL profile Layer 2 protocols. Select MAC to monitor MAC address of each packet.
IPv4:
Defines the IPv4 ACL profile protocols. Select IPv4 to monitor IPv4 address of each packet.
IPv6:
Defines the IPv6 ACL profile protocols. Select IPv6 to monitor IPv6 address of each packet.
To define the MAC ACL Rule:
Select
MAC
click
Next
button. The updates to show the follows:
Figure 4.99 – Add Access Rule - MAC
Assign sequence number:
Sequence No. (1-65535):
Specify the sequence number. The value is from 1 to 65535.
Auto Assign:
Auto assign the sequence number for a new rule.
Assign Rule Criteria:
Specify the MAC address settings.
Source:
Select the source MAC to be specified or Any. Enter a source MAC address and source MAC mask,
e.g. FF-FF-FF-FF-FF-FF.
Destination:
Select the destination MAC to be specified or Any. Enter a destination MAC address and
destination MAC mask, e.g. FF-FF-FF-FF-FF-FF.
If user selects the
802.1Q VLAN
box, then need to specify the
dot1p
and
VLAN ID
.
Dot1p (0-7):
Specify the dot1p priority.
VLAN ID:
Selecting this option instructs the Switch to examine the 802.1p priority value of each packet
header and use this as the, or part of the criterion for forwarding.
If user selects the
Ethernet Type
box, then need to specity the
Ethernet Type
and select the
Action
.
Ethernet Type:
Selecting this option instructs the Switch to examine the Ethernet type value in each frame’s
header.
Action:
Specify the ACL forwarding action matching the rule criteria.
Permit
forwards packets if all other
ACL criteria are met.
Deny
drops packets if all other ACL criteria is met.
Priority (0-7):
Specify the MAC ACL priority whish values are 0-7.
Replace Priority:
Check the box to enable the Replace Priority feature.
Click
Next
button then the ACL profile is added.
To define the IPv4 ACL Rule:
Select
IPv4
with
ICMP
click
Next
button. The updates to show the follows:
6
6
9
9
