4 Configuration
D-Link Web Smart Switch User Manual
L2 Functions > LLDP > 802.3 Extension TLV
The 802.3 Extension LLDP Port Settings page displays 802.3 Extension LLDP port information and contains
parameters for configuring 802.3 Extension LLDP port settings.
Figure 4.65 – L2 Functions > LLDP > 802.3 Extension TLV
From Port/To Port:
A consecutive group of ports may be configured starting with the selected port.
MAC/PHY Configuration/Status:
Specifies whether the MAC/PHY Configuration Status is enabled on the
port. The possible field values are:
Enabled –
Enables the MAC/PHY Configuration Status on the port.
Disabled –
Disables the MAC/PHY Configuration Status on the port.
Power via MDI:
Advertises the Power via MDI implementations supported by the port. The possible field
values are:
Enabled –
Enables the Power via MDI configured on the port.
Disabled –
Disables the Power via MDI configured on the port.
Link Aggregation:
Specifies whether the link aggregation is enabled on the port. The possible field values
are:
Enabled –
Enables the link aggregation configured on the port.
Disabled –
Disables the link aggregation configured on the port.
Maximum Frame Size:
Specifies whether the Maximum Frame Size is enabled on the port. The possible
field values are:
Enabled –
Enables the Maximum Frame Size configured on the port.
Disabled –
Disables the Maximum Frame Size configured on the port.
Define these parameter fields. Click
Apply
to implement changes made and click
Refresh
to refresh the
table information.
L2 Functions > LLDP > LLDP Management Address Settings
The LLDP Management Address Settings allows the user to set management address which is included in
LLDP information transmitted.
50
