D-Link DGE-660TD User Manual
6
• Insert the DGE-660TD into the Cardbus slot of your laptop.
• Gently insert the front end of the DGE-660TD into the Cardbus slot on your laptop until it is firmly seated. Make sure that the card is
face-up, as shown. Do not force the insertion.
• Connect an Ethernet Cable (CAT5) from a switch or hub to the DGE-660TD.
This section refers to all users, regardless of which operating system you use.
NOTE: You must first install the drivers as explained in Section 1. If you have not done this and you have inserted the
DGE-660TD into the Cardbus slot, you will need to cancel the New Hardware Wizard, and start over at the beginning of this
installation guide.
Insert the Adapter
Summary of Contents for DGE-660TD
Page 1: ......
