DGE-530T Gigabit Ethernet Adapter Card
11
This utility should only be used by experienced network administrators. Additional software or
services may need to be previously installed or configured prior to installation of the SNMP
protocol.
D-Link Network Control
Installed automatically with the driver is the D-Link Network Control program, which may be
opened on the Control Panel of your computer. The configuration and settings information for
this program may be found by clicking the Help button of the current screen. This should provide
you with any information you should need.
NOTE:
D-Link Network Control is not supported for Windows XP 64 Bit
Edition.
The Cable Diagnostic Feature
Within the D-Link Network Control program is a feature for examining the quality and the
characteristics of a network cable that has been connected to the DGE-530T. This feature, named
the Virtual Cable Tester (VCT), will make it possible for the user to detect and report potential
cabling issues such as cable opens, cable shorts and impedance mismatches. The distance of the
fault can be reported to within one meter.
To view the VCT window, simply double click the icon for the D-Link Network Control and select
the VCT folder heading at the top of the window as seen below.
