Change Administrative User Access level
To change the access lever of a user click on the user name and you will see the following
screen. From here you can change the
access level by entering the appropriate
level in the
Group Membership
field.
Access levels
•
Administrator
– the user
can add, edit and remove
rules and change all
settings.
•
Read-only
– the user can
only look at the
configuration of the firewall.
•
No Admin Access
– The
user is only used for user
authentication.
Follow these steps to change Administrative User Access level.
Step 1.
Click on the user you would like to change level of.
Step 2.
Choose the appropriate level by entering into the Group
Membership Field
.
Click the
Apply
button below to apply the setting or click Cancel to discard changes.
Change Administrative User Password
To change the password of a user click on the user name and you will see the following
screen.
Follow these steps to change
Administrative User password.
Step 1.
Click on the user you would like
to change level of.
Step 2.
Enable the
Change password
checkbox.
Step 3.
Enter the new password twice.
Click the
Apply
button below to apply the setting or click Cancel to discard changes.
Note
:
The password should be at least six characters long. The password can contain
numbers (0-9) and upper and lower case letters (A-Z, a-z). Special characters and spaces
are not allowed.
Summary of Contents for DFL-1100 - Security Appliance
