DFE-650 Series Fast Ethernet PC Card User's Guide
22
Software Installation
(key an
n
, followed by
<Enter>
). And you must then remember
to enter the
STARTNET.BAT
command each time you connect
and prepare for network operations.
Key
<F10>
to approve the installation and initiate the automatic
portion of the installation process. (Or key
<Alt + F10>
to
abort.)
Final Screen of INSTALL.EXE
At completion of the INSTALL.EXE run, there will be an a screen
of advisory information which also instructs you to reboot the
notebook PC. In order to avoid some troublesome diagnostics
which would follow a restart at this time, it is necessary to edit the
file STARTNET.BAT before the restart. Key
<ENTER>
to exit
INSTALL.EXE.
Edit STARTNET.BAT
At the DOS prompt, change active directory to the target directory
(named in the Installation Configuration Summary screen). Then
use the DOS Edit utility to edit STARTNET.BAT. For example:
C:\NOVELL\CLIENT32\> EDIT STARTNET.BAT
For each enabled frame type (four types at maximum),
STARTNET.BAT will include a line similar to this shortened
example:
LOAD C:\...\DFE650.LAN FRAME=...
Edit each such statement (there will be a maximum of four) as
follows: just ahead of the FRAME keyword, insert "
SLOT=1
"
separated by at least one space before and after (but if you know
that the DFE-650 is in PC Card Slot No. 2 of the notebook PC, then
you should insert "
SLOT=2
). The shortened example above would
then read,
