Modular Ethernet Switch User’s Guide
36
Using the Console Interface
Figure 6-4. Save Changes screen
After the settings have been saved to NV-RAM, they will become the default settings for the Switch, and they
will be used every time it is powered on, reset or rebooted. The only exception to this is a factory reset, which
will clear all settings and restore them to their initial values listed in the Appendix, which were present when
the Switch was purchased.
Login On The Switch Console By Registered Users
To log in once you have created a registered user,
1.
Type in your username and press <Enter>.
2.
Type in your password and press <Enter>.
3.
The main menu screen will be displayed based on your
Administrator
or
Normal User
access level or
privilege.
Create/Modify User Accounts
To add or change your user password:
1.
Choose
Users Accounts Management
from the main menu. The following
User Accounts
Management
menu appears:
