Modular Ethernet Switch User’s Guide
Web-Based Network Management
99
Figure 7-31. Port Ingress Filter window
Use this window to enable or disable the ingress filtering check for each desired port. Ingress filtering means
that a receiving port will check to see if it is a member of the VLAN ID in the packet before forwarding the
packet. Click
Apply
to let the settings take effect.
Click on the
Port VLAN ID (PVID)
icon to access the following window:
Figure 7-32. Port VLAN ID (PVID) window
This screen allows you to set a Port VLAN ID number (PVID) for each port. VLAN 1 is the default VLAN. All
ports are assigned PVID = 1 when VLANs are enabled.
Note:
If a port is a member of a trunk group but is not the anchor, the items shown in the above table
will be read-only and the values will be the same as those for the anchor port.
Click
Apply
to let the settings take effect.
