manualshive.com logo in svg

D-Link DES-3550, Command Line Interface Reference Manual

The D-Link DES-3550 is a powerful network switch that offers advanced features and flexibility. To help you maximize its potential, we offer a free Command Line Interface Reference Manual for download on our website. This comprehensive manual provides detailed instructions and configurations, ensuring seamless operation of your DES-3550.

Share
Download
background image

DES-3550 Layer 2 Fast Ethernet Switch 

Example usage: 

To view authenticaion server hosts currently set on the Switch: 

DES-3550:4#show authen server_host 
Command: show authen server_host 
 
IP Address    Protocol    Port  Timeout  Retransmit  Key 
---------------     --------         -----   -------       ---------------   ------------------ 
10.53.13.94    TACACS    49     5              2                  No Use 
 
Total Entries : 1 
 
DES-3550:4# 

 
 

create authen server_group 

Purpose 

Used to create a user-defined authentication server group. 

Syntax 

create authen server_group <string 15> 

Description 

This command will create an authentication server group. A server 
group is a technique used to group 
TACACS/XTACACS//RADIUS server hosts into user 
defined categories for authentication using method lists. The user 
may add up to eight (8) authentication server hosts to this group 
using the

 config authen server_group

 command. 

Parameters 

<string 15>

 - Enter an alphanumeric string of up to 15 characters to 

define the newly created server group. 

Restrictions Only 

administrator-level users can issue this command. 

Example usage: 

To create the server group “group_1”: 

DES-3550:4#create authen server_group group_1 

Command: create authen server_group group_1 

 

Success. 

 

DES-3550:4# 

 

 

 

272

Summary of Contents for DES-3550




































































































































































































































































































































Reviews:

No comments

Related manuals for DES-3550

D-Link DES-1228/ME User Manual preview
DES-1228/ME
Brand: D-Link Pages: 267
Paradyne 4300 Installation Instructions Manual preview
4300
Brand: Paradyne Pages: 22
Cabletron Systems SmartSwitch Router User'S Reference Manual preview
SmartSwitch Router
Brand: Cabletron Systems Pages: 338
National Instruments NI 9229 Operating Instructions Manual preview
NI 9229
Brand: National Instruments Pages: 34
OCCITALINA OXTOPUS EIA-709 User Manual preview
OXTOPUS EIA-709
Brand: OCCITALINA Pages: 54
Konica Minolta Network Setup Network Setup Manual preview
Network Setup
Brand: Konica Minolta Pages: 38
Western Digital My Net N750 Start Here Manual preview
My Net N750
Brand: Western Digital Pages: 8
Moxa Technologies ICS-G7748A Series Quick Installation Manual preview
ICS-G7748A Series
Brand: Moxa Technologies Pages: 10
ZyXEL Communications P-336M Specifications preview
P-336M
Brand: ZyXEL Communications Pages: 2
pivotal COMMWARE ECHO 5G How To Set Up preview
COMMWARE ECHO 5G
Brand: pivotal Pages: 2
WAGO 852-1411 Operating And Assembly Instructions preview
852-1411
Brand: WAGO Pages: 2
Waver WAC52N Quick Start Manual preview
WAC52N
Brand: Waver Pages: 36
Planet ADE-3110 User Manual preview
ADE-3110
Brand: Planet Pages: 66
TRENDnet TEW-WLC100P User Manual preview
TEW-WLC100P
Brand: TRENDnet Pages: 57
Ceragon Fibe-Air IP-10G Installation Manual preview
Fibe-Air IP-10G
Brand: Ceragon Pages: 71
Enterasys GPIM-08 Reference Sheet preview
GPIM-08
Brand: Enterasys Pages: 2
Aaeon FWS-7811 Manual preview
FWS-7811
Brand: Aaeon Pages: 100
Allied Telesis IS230-10GP Web User Manual preview
IS230-10GP
Brand: Allied Telesis Pages: 136

Brands by name

Popular brands

Load more brands