DES-3550 Layer 2 Fast Ethernet Switch
config sntp
Purpose
Used to setup SNTP service.
Syntax
config sntp {primary <ipaddr> | secondary <ipaddr> | poll-
interval <int 30-99999>}
Description
Use this command to configure SNTP service from an SNTP server.
SNTP must be enabled for this command to function (See
enable
sntp
).
Parameters
primary
−
This is the primary server the SNTP information will be
taken from.
secondary
−
This is the secondary server the SNTP information will
be taken from in the event the primary server is unavailable.
poll-interval <int 30-99999>
−
This is the interval between requests
for updated SNTP information. The polling interval ranges from 30 to
99,999 seconds.
Restrictions Only
administrator-level users can issue this command. SNTP
service must be enabled for this command to function (
enable sntp
).
<ipaddr>
−
The IP address of the primary server.
•
•
<ipaddr>
−
The IP address for the secondary server.
Example usage:
To configure SNTP settings:
DES-3550:4#config sntp primary 10.1.1.1 secondary 10.1.1.2 poll-interval 30
Command: config sntp primary 10.1.1.1 secondary 10.1.1.2 poll-interval 30
Success.
DES-3550:4#
217
Summary of Contents for DES-3550
Page 2: ......
Page 99: ...DES 3550 Layer 2 Fast Ethernet Switch 95 ...