DES-3226S Layer 2 Fast Ethernet Switch User’s Guide
18
Using the Console CLI
with the Windows operating system) using an RS-232C serial cable.
Your terminal parameters will need to be set to
:
•
VT-100/ANSI compatible
•
9,600 baud
•
8 data bits
•
No parity
•
One stop bit
•
No flow control
You can also access the same functions over a
TELNET
interface.
Once you have set an IP address for your Switch, you can use a
TELNET
program (in VT-100 compatible terminal mode) to access
and control the Switch. All of the screens are identical, whether
accessed from the console port or from a
TELNET
interface.
After the switch reboots and you have loged in, the console looks
like this:
