DES-3010F/DES-3010FL/DES-3010G/DES-3018/DES-3026 Fast Ethernet Switch Manual
SNMP User Table
The
SNMP User Table
displays all of the SNMP User's currently configured on the Switch.
In the
SNMP Manager
folder, located in the
Administration
folder, click on the
SNMP User Table
link. This will open
the
SNMP User Table
, as shown below.
Figure 6- 17. SNMP User Table
To delete an existing
SNMP User Table
entry, click the
below the
Delete
heading corresponding to the entry you
wish to delete.
To display the detailed entry for a given user, click on the hyperlinked
User Name
. This will open the
SNMP User Table
Display
page, as shown below.
Figure 6- 18. SNMP User Table Display
The following parameters are displayed:
Parameter Description
User Name
An alphanumeric string of up to 32 characters. This is used to identify the SNMP
users.
Group Name
This name is used to specify the SNMP group created can request SNMP messages.
SNMP Version
V1
- Indicates that SNMP version 1 is in use.
V2
- Indicates that SNMP version 2 is in use.
V3
- Indicates that SNMP version 3 is in use.
Auth-Protocol
None
- Indicates that no authorization protocol is in use.
MD5
- Indicates that the HMAC-MD5-96 authentication level will be used.
SHA
- Indicates that the HMAC-SHA authentication protocol will be used.
Priv-Protocol
None
- Indicates that no authorization protocol is in use.
DES
- Indicates that DES 56-bit encryption is in use based on the CBC-DES (DES-
47
